Scanning > 57S ETUP TO USE THE WSD SCANThe following explains how to set up the PC to use the WSD Scan function. In order to usethe WSD Scan function, install this device on the PC.WSD Scan can be used from Scan To Computer and Remote Scan via Network.To use WSD Scan, the machine has to be connected with the computer which WindowsVista/ Windows7/ Windows8/ Windows10/ Windows Server 2008/ Windows Server2008R2/ Windows Server 2012/ Windows Server 2012 R2 was installed via Network.INSTALLATION PROCEDURE1. From the Start menu, select Network. The devices connected to the network aredisplayed.2. Right-click the MC363 icon under Multifunction Devices and select Install.If the User Account Control dialog box is displayed, click Yes.REFERENCEBefore starting the following procedure, be sure to check the networkconnection. For details, see the Configuration Guide.NOTEIf a scanner is used via WSD Scan connection and if the device IP address ischanged, select Uninstall in step 2 of Installation procedure and uninstall thescanner, and then execute the install procedure again.MEMOWhen you follow the procedure below, the WIA is installed automatically asthe scanner driver.NOTEBefore starting the installation, select Network and Sharing Center fromthe Control Panel and make sure that Network Search is enabled.
