User authentication and access control > 38USER AUTHENTICATION AND ACCESS CONTROLIf your Administrator has enabled access control on your machine, it will automatically startup in access control mode. You will not be able to use it until you have provided valid logininformation. If the access control setting is:> PIN: you will need to provide a valid PIN (personal identification number).> User name and password: you will need to provide a valid user name andpassword.After using it, you will be expected to log out, leaving the machine in access control mode,unable to be used by unauthorised users.PIN AUTHENTICATIONLOGGING INTO THE MACHINE1. Enter your PIN using the keypad on the control panel.2. Press OK.If authentication succeeds, the top screen displays.LOGGING OUT OF THE MACHINEWhen you have finished operations, be sure to log out of the machine.1. Press the BACK button or Left arrow key until the top screen displays.2. Press the RESET/LOGOUT button on the control panel.U SER NAME AND PASSWORD AUTHENTICATIONLOGGING INTO THE MACHINE1. Make sure that User Name is selected and then press the Right arrow key.2. Enter your name.3. Using the arrow keys, highlight Done and then press OK.4. Make sure that Password is selected and then press OK.5. Enter your password.6. Using the arrow keys, highlight Done and then press OK.7. At the Login screen, press OK.If authentication succeeds, the top screen displays.LOGGING OUT OF THE MACHINEWhen you have finished operations, be sure to log out of the machine.1. Press the BACK button or Left arrow key until the top screen displays.2. Press the RESET/LOGOUT button on the control panel.NOTEAfter a certain period of time, the machine automatically logs out users.NOTEAfter a certain period of time, the machine automatically logs out users.