Copying > 504. Press the Left arrow key or Back button to return to the start menu.5. If access control is enabled, logout once you are finished to avoid any unauthorisedaccess.R ESETTING COPY SETTINGSAUTO RESETAll settings you configured for your copy job return to their default values if no operationis made for a set period of time.The factory default setting is 3 minutes.USING THE RESET/LOGOUT BUTTONBy pressing the RESET/LOGOUT button, the settings you configured for your copy jobreturn to their default values.After copying, press the RESET/LOGOUT key to reset the default settings for the nextuser.Repeat OFFx2x4Allows you to print multiple images ofan original document on a singlesheet.ID Card Copy ON, OFF Allows you to set ID card copying asthe default copy mode.ContinuousScanON, OFF Allows you to continue scanning moredocuments. Allows you to construct asingle scan job from multipleindividual sheets or originals.Mixed Size ON, OFF Allows you to load originals of samewidth but different length in the ADF.The following document sizes can beset concurrently; Letter and Legal13/Legal13.5/Legal14, A4 and Folio.When enabled, the tray setting isautomatic, you cannot specify a traymanually.Margin ON, OFF Allows you to change the documenttop and left margin areas.Input range: -25 to +25mm.Edge Erase ON, OFF Allows you to block out the peripheralareas of the document where spuriousshadows and borders may arise whencopying with the document coveropen (such as with books andmagazines) or for other purposes.Input range: 2 to 50mm.FEATURE OPTION DESCRIPTION
