Oki MC363dn User Manual

Also see for MC363DN: User guide User guide Configuration guide Manual

Contents

Oki MC363dn User Manual Manual pdf 98 page image

Faxing > 98Fax job view/cancelIf you no longer require a stored fax job, you can cancel and remove it from your MFP’smemory.1. Press the Fax button on the control panel to prompt the Fax Mode screen.2. Using the arrow keys, scroll to Fax and press OK.3. Using the Down arrow key, scroll to Fax Job View/Cancel and press OK.4. Using the Down arrow key, scroll to the fax job you wish to delete and press OK.5. Check the job contents, then press the Right arrow key.6. Using the Down arrow key, scroll to Delete Reserved Tx and press OK.7. Using the arrow keys, select Yes to continue or No to cancel and press OK.Fax job reports and listingsFAX RECEIVINGYour MFP is set to receive faxes automatically.The machine behaviour differs depending on the specified reception mode.When the machine is receiving faxes, the DATA IN MEMORY indicator is lit and the senderinformation is displayed on screen. The indicator remains lit while the data is stored inmemory.Fax ready modeThis is the factory default setting; your machine is set so that it automatically receivesfaxes.Tel/Fax ready modeWhen the machine is set to Tel/Fax Ready Mode, you can receive calls and faxes. Youmust connect an external telephone in advance to receive calls, refer to the ConfigurationGuide for details.NOTEWhen you select a broadcast job, the job itself is deleted. If you wish to cancelan individual destination within the broadcast job, refer to “Deleting specifieddestinations” on page 91 for details.NOTEIf the MFP is actively sending or receiving a fax, then any incoming faxes willbe rejected.NOTE> The sender name and fax number registered on the sender machine aredisplayed on screen.> If the memory overflows while the machine is receiving data, thereception is cancelled. If this happens, ask the sender to resend the fax.