43967002TH Rev.1 257 /Oki Data CONFIDENTIAL 5. Maintenance MenuSetup itemAdministrator setupNetwork default settingHDD initialization(All area formatting)HDD formatting(Common partition)HDD formatting(PCL partition)HDD formatting(PS partition)HDD data complete eraseFLASH initializationLanguage initializationSetup value initializationComplete erasure ofindividual personalinformationGroup counter – Reset *1Job log deletionLogBilling log CL CLJob log (HDD) CL CL CLDebug log (HDD) CLError log (HDD) CLError log (FLASH)Dial history CL CLE-mail address history CL CLFax communication resultinformation CL CLCounterGroup counter (Open to user) CLMaintenance counter (Liferelated)Main counter (Dealertabulation related)Print tabulation passwordFW Scanner unit F/W (includingFax)NIC-F/W (including Web page)Others Mirror carriage transport modeScanner factory adjustmentStored image CL CLMaintenance switch(Confidential)*1 The group counter – Reset is confidential and menu is not open in FCS.*4 When HDD Disable is set, only administrator can log on.(Because the access control mode setup values is stored in Flash, but the userinformation is not stored in HDD.)5.11.2 Initialization by service engineer5.11.2.1 Initialization operation by service engineerThe initialization operations that can be performed by service engineer are shown below.Initialization operation DescriptionFormat HDD(Boot sector erase)This operation can be executed by selecting the menus:[Service Maintenance] - [System Maintenance] - [FormatHDD]. When this operation is executed, the screen exits themenu and initialization of the HDD starts.Format Flash ROM(System area initialization)This operation can be executed by selecting the menus:[Service Maintenance] - [System Maintenance] - [FormatFlash ROM]. When this operation is executed, the screenexits the menu and formatting of the Flash device that isresident (on-board) installed in the MFP starts.Administrator password reset Returns the administrator password that has been set byuser, to the default value.This operation can be executed by selecting the menus:[Service Maintenance] - [System Maintenance] - [ChangePassword] .This setting is executed for the propose of initializing theadministrator password by service engineer in the case whenuser forgets the administrator password.All Reset Returns the contents of the EEPROM, FLASH ROM andHDD to the factory shipment setting (factory default) value.This operation can be executed by selecting the menus:[Service Maintenance] - [System Maintenance] - [All Reset].This setting is executed for the propose of erasing by dealerfor an example, the information of the previous user who hasbeen using the MC860, in the case when dealer is going tolend the MC860 to other client.OKIUSER change Changes the destination of the MC860.This operation can be executed by selecting the menus:[Service Maintenance] - [System Maintenance] - [OKIUSER].Country code change Select the country in which the MC860 is going to beinstalled.This operation can be executed by selecting the menus:[Service Maintenance] - [Fax Maintenance] - [Country Code].
