43967002TH Rev.1 262 /Oki Data CONFIDENTIAL 5. Maintenance Menu5.13 Maintenance utilitiesAdjustments shown in Table 5-2 can be performed by the maintenance utilities. Details of themaintenance utilities are described below.(1) Maintenance utilities, Operation manual:42678801FU01 Rev22 or higher (Japanese)42678801FU02 Rev5 or higher (English)(2) Maintenance utilities programs are shown belowApplicable OS Filename Model No.For Win9xMe/NT/2000/XP/Vista(Japanese/English)MuWin.zip 42678801FW01Rev1 or higherTable 5-2 Adjustment items of maintenance utilitiesItem Adjustment contentsMaintenanceutilities,Operationmanual, ItemnumberOperation onOperator panel(Item numberscorrespond to thoseof Maintenancemanual.)1 PU boardreplacementCopying the EEPROM of PU PCBAdjustment purpose: Above data is copiedto another PCB when the PU PCB is goingto be replaced by other PU PCB due tomaintenance replacement.Item 2.4.1.1.1 Use of this menu itemis prohibited.2 PU serialnumbersettingRewriting the MFP serial number saved inPUAdjustment purpose: If copying of EEPROMdata of the PU PCB is impossible (due to I/Ferror, etc.,), above setting is made on themaintenance replacement PCB.Item2.4.1.1.2.2Use of this menu itemis prohibited.3 Factory/ShippingmodeFactory mode or Shipping mode switchingAdjustment purpose: If copying of EEPROMdata of the PU PCB is impossible (due toI/F error, etc.,), above setting is made onthe maintenance replacement PCB. Defaultsetup of the maintenance replacement PCBremains in the Factory mode in most cases,the Shipping mode should be set by usingthis function.Item2.4.1.1.2.3Item 2.4.1.2.2Item 5.3.2.10Item Adjustment contentsMaintenanceutilities,Operationmanual, ItemnumberOperation onOperator panel(Item numberscorrespond to thoseof Maintenancemanual.)4 CU PCBreplacementRewriting EEPROM setup value of CU PCBAdjustment purpose: Above data is rewritteninto another PCB when the CU PCB is goingto be replaced by other CU PCB due tomaintenance replacement.Item 2.4.1.1.3 Use of this menu itemis prohibited.5 Serial numberinformationsettingSelection of printer serial number andoutput mode recorded in CU, and rewritingMFP serial numberItem2.4.1.1.4.3Use of this menu itemis prohibited.6 Scanner PCBreplacementCopying the EEPROM of scan PCBAdjustment purpose: Above data is copiedto another PCB when the scan PCB is goingto be replaced by other scan PCB due tomaintenance replacement.Item 2.4.1.1.5 Use of this menu itemis prohibited.7 Setupinformation ofPCB itemSerial number information and Factory/Shipping mode check.Item 2.4.1.1.7 Use of this menu itemis prohibited.8 USB softwareupdateUSB software update Item 2.4.2.2.1 Use of this menu itemis prohibited.9 NIC softwareupdateNIC software update Item 2.4.2.2.2 Use of this menu itemis prohibited.10 NIC WebPage updateNIC Web Page update Item 2.4.2.2.4 Use of this menu itemis prohibited.11 Mac addresssettingMac address setting Item 2.4.2.2.5 Use of this menu itemis prohibited.12 Consumablesitem countermaintenancefunctionConsumable item counter displayDrum counters (Y, M, C, K)Fuser counterBelt counterToner counters (Y, M, C, K)Adjustment purpose: Values of therespective consumable item counters arecopied when consumable item that is still inthe midst of usage is going to be used byother MFP.Item 2.4.1.2.1 Use of this menu itemis prohibited.
