43967002TH Rev.1 279 /Oki Data CONFIDENTIAL 6. Periodic Maintenance6.4 How to clean inside of MFPClean inside of the MFP.Toner can adhere to the metal shaft that is located in between the fuser and the cyan imagedrum cartridge depending on the print pattern. Perform cleaning of the inside of the MFP iftoner has adhered to the metal shaft.1. Turn OFF the power of the MFP.2. Pull the document table lock lever to the front to release thelock, and raise the document table.4. Remove the image drum cartridge from the MFP.1. Remove the four image drum cartridges and place them on a flat workbench.2. Cover the removed image drum cartridge with a black paper.Note! • The image drum (green tubular portion) is highly inherently-brittle.Be very careful when handling it.• Be very careful not to expose the image drum to direct sun light orintense light (light of approx. 1500 lux or more). Do not leave it underthe normal illumination even indoor for 5 minutes or longer.O I3. Press the OPEN button and open the top cover.Caution Failure to observe the caution may result inburn injury.The fuser unit gets very hot. Do not touch the fuser unit.Document tableDocument table lock leverTop cover OPEN buttonTop cover
