Oki Data CONFIDENTIAL 7. Troubleshooting43967002TH Rev. 1 287 /7.5 Troubleshooting methodIf a trouble occurs in the printer, search for it by the following procedure: 7.5.1 LCD Message ListInitializingDisplayed message DescriptionsBitmap Image 1 This message is displayed before the communication startedbetween CU and Panel (CU initializing).Menu Resetting Indicates that EEPROM of the controller side is being reset.The condition that EEPROM is reset includes the followings.- Changes of CU ROM (when disagreement of CU F/Wversion is detected)- Changes of destination channel- Compulsive initialization of EEPROM ("Service Menu"-"System Maintenance"-"ALL RESET")- OEM set of PJL commandWait a MomentNetwork InitializingThe network is in initializing.If this status occurred during the unit initialinzing the messageis displayed by English.Flash Memory Format Displays that Flash memory is being formatted.It is displayed it when Resident/Option Flash memorynot fomented are detected, or "Service Menu"-"SystemMaintenance"-"FLASH FORMAT" of a system maintenancemenu is performed.The function mentioned above is secret to users. Therefore,this status does not occur in a user environment.Checking File System Displays that HDD file system is being checked.Process Check of File System is valid to start from"Management"-"Storage Maint Setup"-"Check File System" ofAdmin Setup Menu.Erasing Disknnn%Indicates that the hard disk is being erased.Erase process of the hard disk is valid to start from"Management"-"Storage Maint Setup"-"HDD Erase" of AdminSetup Menu.nnn: Percentage of erased capacityProblemgeneratedProblem isdisplayed in LCD.Repair using the “LCDMessage List” (see8.5.1).Repair in detail usingtroubleshooting flow (see7.5.2).Abnormal image(or problems thatare not displayedin the LCD)Repair in detail usingtroubleshooting flow (see7.5.3).
