41309401TH Rev.4 135 /Operations:SELECT FUNCTION (OT)MEMORY AVAIL.=100%To bring the LCD up to the desired message,press SELECT FUNCTION key once andone-touch key No. 9 in the standby mode.(In case of no message in memory)The display shows:Press key.←1:FUNC. PROGRAMMINGYES(←) NO(→/1-9*#)←2:DIAL PARAMETERYES(←) NO(→/1-9*#)Press OT9Enter 2 using the ten-key pad.2To DIAL PARAMETERS*1 Not all of the followingdial parameters are released to the users(depending on National codesand if the Service bit is OFF)2.2.1.9 Dial Parameters Settings(1) ProcedureThe following shows the case in which the service bit is on.
