41309401TH Rev.4 204 /6.14.1 G3 Protocol DumpPurpose:To allow the serviceman to obtain a list of protocol signals transferred between the transmitterand receiver.Print conditions:• Modem trace information for each TX/RX is printed. (Informeation for RX is added on 2ndpage.)• Modem result code is printed.• JM information is moved in the arrangement of CM information.• "00" is printed always since the received SID on the 2nd page is invalid.Method:The report will be manually printed out for maintenance purpose. If the previous communicationis G3, G3 communication protocol dump is printed out. If it is G4, the G4 communication protocoldump is printed.1. Title of the report2. Date and time when the report was printed3. Sender ID4. Date of communication5. Time of communication6. One message transmission/reception time7. Identification of remote station• CSI and/or telephone number8. Mode of transmission/reception according to ITU-T designation9. Total number of pages in communicaiton10. Identification of the result of the communication11. Service code12. TX: DIS/DTC/DCS/NSF/NSS/NSC13. Transmitted telephone number14. Transmitted SEP/SUB15. Transmitted SID16. Common information of ITU-T V.34 TX/RX17. Modem trace18. RX: DIS/DTC/DCS/NSF/NSS/NSC (page 2)19. Received telephone number20. Received SEP/SUB (page 2)21. Received SID (page 2)22. Common information of ITU-T V.34 TX/RX (page 2)23. Modem trace (page 2)
