41309401TH Rev.4 90 /The display shows:2:TECHNICAL FUNCTIONYES(←) NO(→/1-6)←←Operations:To bring the LCD up to the desired messagepress SELECT FUNCTION key once, COPYkey twice and "2"key. (In case of no messagein memory)Press key.* "Enter 01 - 39" when G4 option is not installed.←Service bit setting is T.F. No. 01.Enter "01"Reference: See Figure 2.6 on the next page for the general operation flow.FUNCTION NO. [ ]ENTER 01-43→Setting (Toggle)X: OFF ON→←"01"To 02: MONITOR CONT.01:SERVICE BIT ?[ X ] YES(←) NO(→)2.2.1.3 Technical Functions ExampleNote: The fonts displayed on the LCD operation panel may differ from the fonts written thismanual.(1) Service Bit Setting1) PurposeTo enable or disable the following functions:• Drum and toner counter display (clear)• Service default report printing• Protocol dump report printing• Ring response time setting• Dial parameters setting• Printer counters clearing2) Procedure
