41309401TH Rev.4 378 /ErrorPaper inlet jam Only the manual feed sensor detects "Paper exists" when the powersupply is on.The leading part of the paper does not reach the paper sensor althoughhopping operation was performed three time.Cause of ErrorPaper feed jam The leading part of the paper does not reach the outlet sensor within afixed time after it has passed the paper sensor.Paper outlet jam The trailing part of the paper does not pass the outlet sensor within L mmafter the leading part of the paper has passed the outlet sensor.2.52" (64 mm) L 15.77" (400.6 mm)<= <=Paper size error The trailing part of the paper does not pass the paper sensor within L mmafter the leading part of the paper has passed the paper sensor.2.52" (64 mm) L 15.77" (400.6 mm)<= <=Type of ErrorPaper feed errorPaper feed jam1Paper size errorPaper outlet jamPaper feed jam 2Supervisory SensorElectromagnetic clutch ON/Paper sensor ONPaper sensor ON/Outlet sensor ONPaper sensor ON/Paper sensor OFFOutlet sensor ON/Outlet sensor OFFPaper end sensor OFF/Outlet sensor OFFReference Value69.8122.92.52" (64 mm) L15.77" (400.56 mm)121.9Pluse Minus45.020.03520.045.020.0ErrorUnit: mm<= <=2.52" (64 mm) L15.77" (400.56 mm)<= <=3. Paper Jam DetectionThe OKIFAX4550/OKIFAX4550 ISDN monitors the paper status when the power supply ison and during printing. In the following cases, the OKIFAX4550/OKIFAX4550 ISDNinterrupts the printing process as a paper jam. Printing can be recovered by opening thecover, removing the jammed paper, and closing the cover.
