41309401TH Rev.4 161 /Frame Assembly-Scanner (U)Gear (Z31)Bearing SARoller Assembly SensorSpring (L)Red markView from ASpring (R)Earth Cable Plate-Support4.3.4 Separation Rubber, Roller Assembly Sensor(1) Disassembly procedurea) Separation rubber:The separation rubber can be removedfrom the Frame Assembly-Scanner (U).b) Roller Assembly Sensor:Remove the Plate-Support by removingthe two screws 1.Note: Just fitting to two bossess.c) Remove the two springs (L) and (R).d) Remove the Roller Assembly-Sensor byremoving the Gear (Z31).Note: When replacing the RollerAssembly Sensor, uses a Rollerwith red mark.(2) Reassembly procedureReverse the disassembly procedure.
