41309401TH Rev.4 27 /The transmitter sends a call-back message to the receiveronly when the receiver does not respond to voice request ofthe transmitter.The fax can transmit a programmed alphanumeric message,such as company’s name, consisting of up to 32 characters.* (Outside only)Received TSI can be printed at the top of the received page.* TF + 05 (To enable or disable this function)The fax will automatically print out a power outage report whenthe AC power is restored after the power fuilure.The fax can print out an activity report manually, and providesa record of your fax machine's last 30 communications. Thisreport does not contain the results of messages which werereceived without errors. However it does contain messagesreceived in memory with or without errors.* REPORT PRINTOUT+1(Manual printout)The fax can print out a message confirmation report manuallyor automatically in the following cases.(1) Manual printBy pressing the COPY key after a communication(2) Automatic printoutWhen the FP+01 (to enable or disable automatic printingafter a communication) is set to Enable.The fax can print out a broadcast entry report if specifiedduring operating sequence of a broadcast.The fax can print out a broadcast confirmation report manuallyor automatically.* COPY key (Manual printout): Pressed after a broadcast.* REPORT PRINTOUT + 2 (Manual printout)* FP +02 (To enable or disable automatic printing)The fax can print out this report automatically on completionof a confidential reception.Printing the list of received but not printed yet documents andwaiting documents for transmission stored in the memory.* REPORT PRINTOUT + 3 (Manual printout)Table 1.2 (1/2) Reports and Lists SpecificationsNo. Item Specifications1 Call-back message2 Sender ID3 Transmitting subscriberidentification(TSI) printing4 Cancel report(Power outage report)5 Activity report6 Message confirmation report7 Broadcast entry report8 Broadcast confirmation report9 Confidential reception report10 Memory files report1.6 Reports and ListsTable 1.2 shows Reports and Lists Specifications.The described information for FAX2NET service referes to "FX-046FAX/MFP Product Specification".Note: F +OT: Press FUNCTION and One-touch keyFP: Function program settingTF: Technical function setting
