6This camera has two viewfinders; one is aminiature LCD in the viewfinder and the other is aretractable 3.-type LCD.Use the viewfinder that best suits the applicationand shooting conditions.The brightness and hue may differ between theimages appearing on the viewfinder and LCDmonitor and those displayed on a TV monitor.To see how the final images will appear, checkthem on a TV monitor.Using the viewfinder1 Set the POWER/Mode selector switchto ON (Page 25) and check that imagesappear in the viewfinder.PBPOWERCAMERAMODEONOFF2 Adjust the viewfinder’s angle so that thescreen is positioned where it is easiest tosee.You can move the viewfinder out to about90° perpendicular to the camera.3 Adjust the diopter adjustment dial sothat you can see the characters on theviewfinder screen clearly.Diopter adjustment dialEye piece••ViewfinderDo not allow the eyepiece of the viewfinderto remain in direct contact with sunlight orother strong light sources.Internal components may be damaged andfire may be caused if light accumulatesthrough the lens.•Fitting the eye cupAttach the eye cup by aligning the ridges on theeye cup holder with the grooves on the eye cupand fitting them together.Turning the eye cup after attaching it maycause the eye cup holder to come off. If theeyecup holder does come off, see “Cleaningthe Viewfinder” (Page 88) for details on how torefit it.Eye cup holderEye cupAlign the ridges with the grooves.•
