Playback591 Thumbnail display status (Page 61)The types of clips displayed as thumbnailsappear in this area.2 Card status displayDisplays the status of SD Memory Card.3 Battery remaining display (Page 70)Displays the remaining battery capacity.4 Cursor (yellow frame)Displayed on the currently selected thumbnail.5 Recording mode displayDisplays the recording mode of the clipcurrently highlighted by the cursor.6 Recording format displayDisplays the recording format of the currentlyselected clip.7 Duration displayDisplays the duration of the currently selectedclip.8 Time display (Page 61)Displays the time code at the start of cliprecording/user information at the start of cliprecording/time of recording/date of recording/date and time of recording–according to thesettings.9 Clip numberDisplayed in order of recording (up to 00clips). Numbers of clips that cannot be playedback (e.g. clips of different recording formats)are displayed in red.10 : Clip protect displayDisplayed on the protected clips.11 IndicatorsM : Shot markThis indicates that a clip has a shot mark.(Right column): Resume playback displayDisplayed on the clips on which the resumeplayback setting has been applied.Adding shot marks to clipsAdding shot marks ( M ) will make it easier tofind the clips you are looking for.1 Tilt the Operation lever in thedirections to move the yellow frame to theclip for which a shot mark is to be added.2 Press the USER button to which the shotmark function has been allocated. (Page79)To release a shot mark, repeat the above steps.It is possible to add shot marks to clipsrecorded using this product only.•
