56Setting user informationSetting user information allows you to store 8-digit information in the hexadecimal format.User information is automatically saved in thememory and retained after you turn off the power.1 Set the POWER/Mode selector switch toON.2 In the setup menus, TC/UB SETUP screen,select UB PRESET.Menu operation (Page 75)TC/UB SETUPTC MODE DFTCG REC RUNTC PRESET NOUB PRESET NO3 Tilt the Operation lever in the directionto move to YES, and push the Operationlever.UB PRESETTC MODETCGTC PRESETYESUB PRESETNO•4 Set the user information.Tilt the Operation lever in the directionsand select user information characters.You can use numbers from 0 to 9 andletters from A to F.UB PRESETUB 0 0 0 0 0 0 0 0Tilt in the direction to move to the next digit,and tilt in the directions again to selectcharacter.UB PRESETUB F 0 0 0 0 0 0 0You can reset the user information to nothingby pressing RESET button.RESET buttonBARS SHUTTERAUDIOSPEEDINPUTMIC POWER +48V（R）1 2SELWFMRESETCOUNTEREVF DTLMIX ZEBRASELECT CH 2INT ONOFFINPUT 2（L）INTINPUT 1INPUT 2CH 15 Push the Operation lever when you havefinished setting the user information.6 Tilt the Operation lever in the directionto move to YES, and push the Operationlever.UB PRESETUBPRESET?YESNO•Charging the built-in battery/Setting the time code (continued)
