48During shooting, you can record up to twochannels of sound. You can also switch the inputsound to be recorded on each of the channels tothe built-in microphones, external microphones oraudio equipment connected to camera.BARS SHUTTERAUDIOSPEEDINPUTMIC POWER +48V（R）1 2SELWFMRESETCOUNTEREVF DTLMIX ZEBRASELECT CH 2INT ONOFFINPUT 2（L）INTINPUT 1INPUT 2CH 1CH2 SELECT switchCH1 SELECT switchINPUT 1/2 (MIC POWER +48V) switchesUsing the built-in microphone1 Switch the CH1 SELECT switch to INT (L).Audio from the built-in microphone Lch isrecorded to audio channel 1.2 Switch the CH2 SELECT switch to INT (R).Audio from the built-in microphone Rch isrecorded to audio channel .••Switching Audio InputUsing an external microphone andaudio equipment1 Connect an external microphone or audioequipment to the INPUT 1/2 (XLR 3-pin)terminals. (Page 66)OFF1HANDLE ZOOM2 3ONINPUT 1 terminalINPUT 2 terminal2 Use the INPUT 1/2 switches to switch theaudio input.PUSHINPUT 2 switchINPUT 1 switchLINE: (audio equipment is connected)Input level is 0 dBu.MIC: (an external microphone isconnected)Input level is –50 dBu.You can change the input level to –60 dBuin the setup menus, RECORDING SETUPscreen MIC GAIN1 and MIC GAIN. (Page80)Be aware that sensitivity will be higher ifyou choose –60 dBu so you will recordmore noise.
