119Chapter6 ManipulatingClipswithThumbnails3 PresstheTHUMBNAILMENUbuttonandselectOPERATIONCOPYfromthethumbnailmenu.• Select slot 1-2 or SD memory card as thedestination.• When a confirmation screen asks you to confirmthat you want to copy the clip, use a cursor buttonand the SET button to select YES if you want tocopy the clip. NOTE• Do not turn off the power or remove a P2 card while data isbeing copied. Otherwise the P2 card may fail or defectiveclips may be generated. Delete any defective clips that aregenerated and copy them again.• When clips are copied to P2 cards, all the information onthe clips is copied. However, when they are copied to the SDmemory card *1, video and sound information is not copied,only thumbnails, clip metadata, icons, voice memo, textmemo, proxy, and real-time metadata.• When there is insufficient recording capacity on thedestination, the message “LACK OF REC CAPACITY!” isdisplayed, and copying will not proceed. When clips selectedfor copying contain defective clips, the message “CANNOTCOPY” appears and copying will not proceed. If the selectedclips include clips already on the destination P2 card,copying will not proceed.• To interrupt copying, press the SHIFT and EXIT buttons orthe SET button. The clip that was being copied is deleted atthe destination.• When identical clips exist on the destination card, the“OVERWRITE?” is displayed. Select “YES” or “NO”.*1 Regarding SD memory cards to be used, see [SD memorycard precautions] (page 24).Setting of Clip Meta DataInformation such as the name of the person who shot thevideo, the name of the reporter, the shooting location, or atext memo can be read from the SD memory card, and canbe recorded as Clip Meta Data.Reading the SD memory card thatcontains the Clip Meta Data (metadataupload file)1 InserttheSDmemorycardthatcontainstheClipMetaData(metadatauploadfile).2 PresstheTHUMBNAILbutton.• The thumbnail screen appears on the LCDmonitor. NOTEPress the THUMBNAIL button while pressing DISP/MODE CHK button when a thumbnail is displayed tomove to step 4.3 PresstheTHUMBNAILMENUbuttonandSelectMETADATALOADfromthethumbnailmenu,andpresstheSETbutton.4 NamesofmetadatauploadfilesstoredontheSDmemorycardaredisplayed*1.Selectthedesiredfilesusingthecursorbuttons,andchooseYES.• Uploading starts.• Uploaded metadata is retained even if the poweris turned off.• For more information on confirmation of uploadeddata, see [Checking and modifying readmetadata] (page 120).*1 Press the cursor button (o) to display the fullname of the file, up to 100 characters, at thecursor position. Press the cursor button (p) toreturn to the previous location.
