75Chapter4 AdjustmentsandSettingsforRecordingScreen displaysT C 1 2 : 3 4 : 5 6 : 2 3 1 12 9 9 9 min B 9 0 %P 2 F U L L P - 1 - C L I PP A U S E U S E R - 11394PROXYC A C1 0 8 0 iAVC-I100P 3 .2KL T . B O X 0 dBN D 18 3 % N D 1F E B 2 5 2 0 0 8 2S P O TF 5 . 63 : 5 9 :Z59996 0 : 2 4 P N D R S12 = = = = = = = = 1/ 2 5 060CHCHF B C132714 151224252612346101189751617181920222321281 Time code displaysEach press of the COUNTER button displays (or turnsoff) the indications listed below.• (No indication)• Counter:Counter value (during recording only)• TC: Time code valueTC* is indicated when the time code valuecannot be correctly read from DVCPRO/DVconnector input.The colon between the seconds and theframes changes to a period (.) in drop framemode.• tc: Time code value (frame digits are indicatedin 24 frames)tc* is indicated when the time code valuecannot be correctly read from DVCPRO/DVconnector input.The colon between the seconds and theframes changes to a period (.) in drop framemode.• UB: User bit valuesUB* is indicated when the user bit valuecannot be correctly read from DVCPRO/DVconnector input.• FR: Frame rate information for recording• FR60I: 60i interlace mode (60 fields/s)• FR60P: 60P progressive mode (60 frames/s)• FR30P: 30P progressive mode (30 frames/s)• FR24P*: 24P progressive mode (24 frames/s)• FR24PA*: 24P advanced mode (24 frames/s)• FR50I: 50i interlace mode (50 fields/s)• FR50P: 50P progressive mode (50 fields/s)• FR25P: 25P progressive mode (25 fields/s)* In FR24P and FR24PA modes, the last digit containsthe frame conversion sequence information. NOTEWhen TC, tc and UB are locked to TC IN input, the characters intheir icons change to outline characters TC TC .When the HOLD button is used to temporarily freezeindications, the HOLD indication blinks.2 Warnings• P2 : Blinks when no P2 card is inserted or thecard is write protected.• P2 FULL:Blinks when there is no more space left onthe P2 card.• P2 LACK:Blinks in loop rec mode when there is notenough space left on the P2 card.• : Lights when the battery for the internal clockis depleted.For details, refer to [Charging the internalbattery] (page 160).
