19Chapter PartsandtheirFunctionsAudio (input) Function Section16273 5481 MIC IN (microphone input) jack (XLR, 3-pin)• Connect a microphone (optional accessory) to thisjack.• A phantom-powered microphone may be connected.To use a phantom-powered microphone, set the menuoption F.MIC POWER to ON in the AUDIO SETUPscreen.For details, refer to [Preparing for Audio Input](page 104).2 AUDIO LEVEL CH1/CH2 (audio channel 1/2recording level adjustment) controls• With the AUDIO SELECT CH1/CH2 switch positionedto MAN, these controls can be used to adjust therecording levels for audio channels 1 and 2.• Note that the controls are designed to be locked. Foradjustment, each control must be depressed whileturning.3 AUDIO SELECT CH1/CH2 (audio channel 1/2automatic/manual level adjustment selector) switchUse this switch to select recording level control modefor Audio Channels 1 and 2.AUTO: Recording level automatically controlled.MAN: Recording level manually controlled.For details, refer to [Adjusting Recording Levels](page 62).4 AUDIO IN (audio input selector) switchUse this switch to select signals recorded throughaudio channels 1 – 4.FRONT: Records signals from a microphoneconnected to the MIC IN jack.W.L.(WIRELESS):Records signals from a wireless receiver.REAR: Records signals from audio devices ormicrophones connected to the AUDIO INCH1/CH2 connectors. NOTETo record 2-channel wireless input, switch both CH1 andCH2 to W.L. position and set the menu option WIRELESSTYPE in the AUDIO SETUP screen to DUAL.5 AUDIO IN CH1/CH2 (audio channel 1/2) connectors(XLR, 3-pin)Audio devices or microphones may be connected here.For details, refer to [When Using Audio Devices](page 105).6 LINE/MIC/+48V (line input/mic input/mic input +48V)selector switchUse to select audio signals input to the AUDIO IN CH1/CH2 connectors.LINE: Line input for audio signals input from anaudio deviceMIC: Audio signal input from microphone withinternal power supply (the camera does notsupply power to a phantom microphone).+ 48V: Audio signal input from a microphonethat requires an external power supply(the camera supplies power to a phantommicrophone). NOTEPower is supplied when the menu optionR.MICPOWER in the AUDIO SETUP screen isset to ON.7 FRONT AUDIO LEVEL (audio recording leveladjustment) control• This control adjusts the recording level of audiochannels 1 and 2.• With the AUDIO SELECT CH1/CH2 switch positionedto MAN, this control can be used to adjust therecording levels for audio channels 1 and 2.• Use the menu options FRONT VR CH1 and FRONTVR CH2 in the AUDIO SETUP screen to select theinput connector this control will be used for.8 Wireless slotA Unislot wireless receiver (optional accessory) may beattached here.
