88Chapter4 AdjustmentsandSettingsforRecording NOTE• Pressing the RESET button when an adjustable value isselected in the setting menu EVF SETTING will return thatsetting to its factory default.• The LCD monitor will appear darker than usual if the camerarecorder is cold when it is turned on. The display will returnto its normal brightness as it warms up.• The issues described below are viewfinder phenomena thatmay occur under certain conditions but do not indicate amalfunction. Nor do they affect recording or output signals.- Primary colors (red, blue and green) may be seen whenmoving eye position in the viewfinder.- At low temperature, the screen image may have an irregularpink cast.- When the camera is off, there may be black stripes acrossthe screen. They disappear when the camera is turned on.• Image lag may increase at low temperatures, but this is not amalfunction.Emphasizing Image OutlinesEmphasizing outlines of images in the viewfinder and onthe LCD monitor makes it easier to focus.This function does not affect video output from the cameraor video recorded by the camera.1 AdjustEVFPEAKLEVELandEVFPEAKFREQintheDISPLAYSETUPscreen.PUSH MENU TO RETURNEVF PEAK FREQEVF SETTINGEVF B. LIGHTEVF COLORZEBRA1 DETECTZEBRA2 DETECT0LOW>>>NORMALONZEBRA2 SPOT100%85%EVF PEAK LEVELDISPLAY SETUPSetting the viewfinder tomonochrome modeSet the menu option EVF COLOR to OFF in the DISPLAYSETUP screen to change the viewfinder to monochromemode.
