147Chapter7 MenuOperationsOTHER FUNCTIONS screenItem Setting NotesUSER FILE Saves user files to camera memory, loads them intocamera memory or initializes them. (For details, referto page 89.)LOAD, SAVE, INITIAL• This does not affect options in the SCENE FILEscreen.• Not available in the followingconditions.- When USB DEVICE mode isenabled.- When compiling to a clip in one-cliprecording mode.1394 CONTROL Selects the method the camera uses for controllingexternal devices connected to the DVCPRO/DVconnector. (For details, refer to page 155.)EXT: Controls only the external device, but does nottransfer data to the camera for recording.BOTH: Controls both the external device and thecamera, and also records.CHAIN: When there is no more space left for recordingin the camera, recording is automatically made to theexternal device.OFF: No control• Not available in AVC-Intra mode andDVCPRO HD native mode.• Not available during interval, one-shotand loop recording.1394 CMD SEL Determines how recording is stopped when thecamera controls an external device connected to theDVCPRO/DV connector.REC_P: Engages REC/PAUSE status.STOP: Stops recording.• Not available in AVC-Intra mode andDVCPRO HD native mode.• Not available during interval, one-shotand loop recording.ACCESS LED Determines whether or not the P2 CARD ACCESS LEDshould light.ON, OFFALARM Sets the alarm sound output when an alarm occurs.HIGH, LOW, OFFCLOCK SETTING Sets the internal calendar (date)For details, see [Setting Date and Time of InternalClock] (page 29).TIME ZONE Sets the time difference relative to Greenwich MeanTime (GMT).–12:00 ... 0:00 ... +13:00For details, see [Setting Date and Time of InternalClock] (page 29).• This setting cannot be initialized byperforming the MENU INIT option andthe INITIAL option in USER FILE.GL PHASE Selects the output signal whose phase is locked tothe signal input to the GENLOCK IN connector in HD(1080i, 720P) mode. (For details, refer to page 73.)HD SDI: The HD SDI is locked to the genlock input.COMPOSITE: The down-converted composite signal(VIDEO OUT or SDI OUT 480i (576i) signal) is lockedto the genlock input.• Not available when SYSTEM MODE isset to 480-59.94i (576-50i).H PHASE Adjusts the horizontal phase when phase is locked tothe signal input to the GENLOCK IN connector.–512 ... 0 ... +511• Hold down the JOG dial button andturn it downwards or upwards andmaintain this position to quicklychange values.SEEK SELECT Selects the position that is cued up when the FF orREW button is pressed while playback is paused.CLIP: Start point of clipsCLIP&T: Start point of clips and text memo add pointsMENU INIT Restores all setting menu values including all scenefiles (F1 to F6) and the user file to their factorydefaults.• Not available in the followingconditions.- When USB DEVICE mode isenabled.- When compiling to a clip in one-cliprecording mode.____ indicates the factory setting
