110 Setup: Item SettingsThis menu is used for menu settings.* An underlined setting indicates an initial value.886 DIF CONFIG00000001|0255DFLT1|255Specifies the extension menu.Normally, DFLT is used.890 DIF AUD OUT00000001CH1+2CH3+4Specifies the output channels when the audio signals are in 4-channel mode and output inthe DVCPRO (25 Mbps) format and a DV clip is played back.0: CH1 and CH21: CH3 and CH4MENUItem SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.A00 LOAD0000000100020003USER2USER3USER4USER5Specifies user files loaded in USER 1.0: Loads the contents of USER 21: Loads the contents of USER 32: Loads the contents of USER 43: Loads the contents of USER 5NOTE:Pressing the MENU button when loading completes opens a confirmation screen. Pressthe SET button to store the setting. Press the EXIT button to discard the change andretain the setting.A01 SAVE00000001000200030004USER2USER3USER4USER5LOCKEDSpecifies the user file that saves USER 1 settings.0: Saved to USER 21: Saved to USER 32: Saved to USER 43: Saved to USER 54: Appears when all user files are write protected.NOTE:• A user file in change prohibit status cannot be selected.• When all user files are in the change prohibit status, “LOCKED” appears and datacannot be saved.A02 P.ON LOAD00000001000200030004OFFUSER2USER3USER4USER5Specifies which user files will be loaded into USER 1 and whether or not the USER 1settings should be used in startup when the power is turned on.0: Operation is started with the settings of the previously set user file.1: The content of USER 2 is loaded into USER 1.2: The content of USER 3 is loaded into USER 1.3: The content of USER 4 is loaded into USER 1.4: The content of USER 5 is loaded into USER 1.A03 MENU LOCK00000001OFFONSets/releases the user file (USER2 - USER 5) lock mode.0: Releases the lock. (File data can be changed.)1: Lock is engaged. (File data cannot be changed.)NOTE:USER 1 cannot be locked.A04 PF1 ASSIGN Registers a setup menu item in the PF1 button.A05 PF2 ASSIGN Registers a setup menu item in the PF2 button.A06 PF3 ASSIGN Registers a setup menu item in the PF3 button.Item SettingSettings and brief function descriptionFRNo.SUPERDISP.FRNo.SUPERDISP.
