92 Setup: Changing SettingsYou can assign three of the items that are most often changedto the PF buttons to enable quick changes of the settingvalues.Assign a setting item to the PF button and perform thefollowing operation to change setting values.➝For details on how to assign items to the PF button, refer to“Setup menu No. A04 to A06 (PF1 ASSIGN to PF3ASSIGN).”1 Press the PF (EXIT) button.Registered items appear on the LCD monitor.2 Press the PF button (1 to 3) required to bring up theitem to change.Each press of the button updates the setting value.3 Press the PF (EXIT) button to end changing settings.◆ NOTE:• The change process is automatically disengaged if left idle for5 seconds.• The PF button is not available in the thumbnail and play listmodes.You can lock the system files and user setting files (USER2 toUSER5) to prevent inadvertent changes.➝For details on releasing the system file lock setting, refer to“Setup menu No. 30 (MENU LOCK).”➝For details on releasing the user file lock setting, refer to“Setup menu No. A03 (MENU LOCK).”When the menu is open, you can return the content of the usersetting file that appear on the screen to its factory defaults.◆ NOTE:• This operation returns the content of the user setting file displayedon the screen to its factory defaults. The setting files of other usersare not affected.• System settings cannot be returned to their factory defaults when asystem file is open. Other settings are returned to their factorydefaults.• Settings cannot be returned to their factory defaults when MENULOCK is engaged. Set MENU LOCK to OFF.1 Press the RESET button when the menu is open.2 Press the SET button.Making changes using the PF buttons21,3Using a Lock to Protect the User Setting FileReturning to Factory Defaults (Initial Settings)PCCONTROLREMOTELOCALUNITY422 4UNITY311 3PBCH3010010202/4CH1/312
