Introduction: Control Reference Guide 21 Introduction1. Level meterIndicates the level of audio signals for CH1, CH2, CH3and CH4.The input signal level of audio signals is indicatedduring recording and when EE is selected. Duringplayback the meter indicates output signal levels.Use the METER selector button to switch the audiolevel display to FULL mode or FINE mode. Use thesetup menu to change the reference level.2. Counter displayThis function shows the counter and time codes.It displays CTL (relative position from the beginning),TC (read time code) and UB (user bit of the read timecode).3. Format displayIndicates the set record format and the format of videorecorded on an inserted P2 card.4. TV system displayIndicates the selected TV system. Use the SYSTEMsetting No. 25 (SYSTEM FREQ) setup menu to switchbetween 59.94 Hz or 50 Hz.5. INPUT SELECT displayIndicates selected VIDEO and AUDIO status. Exceptfor analog audio signals, the indicator flashes whenthere is no input for the selected signal.When SDI input is selected, this display flashes if theinput signal is not compatible with the system format.6. U lampIn the EE mode, this lamp lights when an input signalcontains UMID information.Lights during playback when the recording containsUMID information.LCD PaneldB dB dB dB4 0-12-20-30-403210-1-2-3-443210-1-2-3-4L R L R L R L R HD 50CTLTCUB0-12-20-30-40 DVCPROVIDEOCMPSTSDI1394SGAUDIOANALOGSDI1394SGSYSTEM59.94501080i720pU126543dB43210-1-2-3-4L RdB0-12-20-30-40L RFULL modeFINE modeReference level59.94: Lights when a 59.94 Hz system frequencyis selected.50: Lights when a 50 Hz system frequency isselected.VIDEOCMPST: Analog composite video input signalsSDI: Serial digital video input signals1394: IEEE1394 input signalsSG: Internal reference signalsAUDIOANALOG: Analog audio input signalsSDI: Serial digital audio input signals1394: IEEE1394 input signalsSG: Internal reference signals
