Clip Management: Attaching Metadata to Clips 49 Clip Management4 Viewing Set Metadata ValuesUse the cursor buttons to select a metadata item andpress the SET button to view the information.Press the EXIT or SET button after viewing.The screen with the information closes.◆ NOTE:• Repeat operation described in step 4 to check other informationitems.5 Press the MENU button to end processing.Use the following procedure to delete metadata stored in this unit.1 Open the thumbnail screen.2 Press the MENU button.3 Use the cursor buttons to select [META DATA] –[INITIALIZE] and press the SET button.4 Select [YES] in the confirmation screen and pressthe SET button.This deletes the metadata.5 Press the MENU button to end processing.This procedure attaches the loaded metadata to clip that isrecorded.1 Open the thumbnail screen.2 Press the MENU button.3 Use the cursor buttons to choose [META DATA] –[RECORD].4 Select [ON] and press the SET button.This setting records the loaded metadata simultaneouswith video recording. The USER CLIP NAME is attached tometadata as specified by the recording method.5 Press the MENU button to end setup.6 Record video on this unit.◆ NOTE:• When [OFF] is selected in step 4, no metadata is attached to theclip.USER CLIP NAME: The name the user assigned to a clipCREATOR: CreatorLAST UPDATEPERSON:LAST UPDATE PERSONSHOOT: SHOOTERPLACE NAME: LOCATIONSCENARIO: PROGRAM NAME, SCENE NO.,TAKE NO.NEWS: REPORTER, PURPOSE, OBJECTMEMO: RECORDING LOCATION, PERSON,TEXTDeleting MetadataRecording Clips ContainingMetadata