Using USB Connectors and SD Memory Cards: Using This Unit With a Hard Disk 87 Using USB Connectors and SD Memory CardsYou can display thumbnails and manage clips stored on thehard disk in the same way as clips on P2 cards.1 Open the explorer screen.2 Use the cursor buttons to select the partition whereyou want to view thumbnails and press the SETbutton.A thumbnail of the clip on the partition now appears.1) Display statusIndicates the status of thumbnails of hard disk clips.2) Partition informationThe following information appears.3) Record mode and system formatIndicates the record mode and system format of theclip at the cursor location.4) Disk information➝Details are provided on the previous page.◆ NOTE:• Press the EXIT button to return to the explorer screen.• Change the thumbnail screen display as necessary. Thesechanges are performed in the same way as when using P2cards.➝For details, refer to “Changing Thumbnail Display.”• Hard disks formatted using FAT can handle up to 1000 clips.Any clips beyond that limit cannot be opened.• Use the TRIM+ / – buttons to move to thumbnail displays onprevious and subsequent partitions.You can view a variety of metadata on clips stored on a harddisk. The content is the same as that displayed by a P2 cardclip property.1 Select a clip in the hard disk thumbnail screen.Detailed clip information is displayed on the screen.2 Press the MENU button.3 Use the cursor buttons to select [PROPERTY] –[CLIP PROPERTY] and press the SET button.➝For details, refer to “Viewing Clip Information.”Displaying Clip Thumbnails on a Hard DiskSERIAL: P2 card serial numberMODEL: P2 card model nameNUMBER(No.):Partition number (1 -)DATE/TIME:Date and time of partition recording2)1)3)4)SET EXITVERIFY: Verify setting and result at time ofrecordingON: FINISHED Verification wassuccessfulON: FAILED Verification failedOFF No verification* “--” is displayed on P2 store.Viewing Hard Disk Clip Information