Clip Management: Attaching Metadata to Clips 47 Clip ManagementThe count value is indicated as a four-digit number. Whenrecording method “TYPE 2” is selected for the USER CLIPNAME in the clip metadata that is loaded, the COUNT value isincremented by 1 for each new recording and a new clip isgenerated.■ To reset the COUNT valueUse the following procedure to reset the COUNT value.1. Open the thumbnail screen.2. Press the MENU button.3. Use the cursor buttons to choose [META DATA] –[PROPERTY] – [USER CLIP NAME] and press theSET button.4. Use the cursor buttons to select [COUNT RESET]and press the SET button.The COUNT value is reset to 1.5. Press the MENU or EXIT button to end processing.■ Incrementing the COUNT value of the USERCLIP NAME for clips exceeding 4 GBIn the following case, one shot is recorded as multiple clipsand the COUNT value is automatically incremented andrecorded for each shot.• When an 8 GB or larger P2 card is used in this unit and eachcontinuous recording exceeds a preset time.➝For details, refer to “Dividing clips over 4 GB in length”• When one recording spans multiple cards.A P2 device will indicate the thumbnail and COUNT value ofclip 1 when thumbnails and property of the clip are displayed.COUNT ValueExample of a recording on one P2 card (DVCPRO HD):Example of recording a clip on two P2 cards:REC start(start of recording)Stop(recording stop)REC start(start of recording) Stop(recording stop)Recording duration = 6 minutesClip 1COUNT value = AClip 2COUNT value = A + 1Approx. 5 min. Approx. 1 min.Clip 1COUNT value = AClip 2COUNT value = A + 11st card 2nd card
