101Manipulating Clips with Thumbnails : Thumbnail ScreenManipulating Clips with ThumbnailsPress the THUMBNAIL button to display the thumbnailscreen on the LCD monitor. Pressing the THUMBNAILbutton again returns the display to the regular display.When switching is done from the regular screen display tothe thumbnail screen display, all the clips will be displayedon the thumbnail screen.Pressing the MENU button allows you to navigate thethumbnail menu.NoteWith the TCG switch positioned at [SET], when the timecode or user bits are set or when camera menus are beingmanipulated, thumbnails cannot be manipulated.1. Display ModeThe type of the thumbnail indicated on the display andthe types of the other information screens areindicated.ALL: Display all clips.SAME FORMAT:The clips in the same format as the systemformat are shown.SELECT:The clips selected with the SET button areshown.MARKER: Display clips with shot marks.TEXT MEMO:Display clips with text memo data.SLOT n: Display clips in the specified P2 card.(n: 1 to 5, which indicates Slots 1-5.)Updating...:Indicated when the camera-recorder isupdating the screen or reading data. Whenthe screen is being updated, the rotatingicon is indicated.Please refer to [Switching the Thumbnail Display](page 104) for more information.2. Slot numbers and HDD statusThis section indicates on which P2 card the pointedclip is recorded. The number of the slot that containsthe appropriate P2 card is indicated in yellow. If theclip is recorded on more than one P2 card, then thenumbers of all slots that contain the appropriate cardsare indicated. The numbers of the other slots areshown in white if they contain P2 cards.The USB HDD section is indicated as follows:z The USB HDD section is indicated in the followingcolorsz Other than the USB HOST mode: grayz Not connected in USB HOST mode: grayz HDD recognized and usable in USB HOST mode:whitez HDD recognized and thumbnails shown in USBHOST mode: yellowz HDD recognized and data unable to be copied inUSB HOST: red3. Time DisplayYou can set this to display the time code at the start ofclip recording, the user bits at the start of cliprecording, the shooting time, the shooting date, theshooting and date or USER CLIP NAME.4. Recording modeThe recording mode for the clip on which the pointer islocated is indicated.5. System formatThe format for the clip on which the pointer is locatedis indicated.Thumbnail Screen4 5 6 71231189 1012 13 14 15Thumbnail screen
