145Menu : Menu Description TablesMenuThe ____ in the Adjustable Range column indicates thepreset mode.GENLOCKItems/Data SavedAdjustableRange RemarksGENLOCK INTEXTSwitch the camera synchronising signal.INT: Synchronise with the internalreference signal regardless of thereference signal input to theGENLOCK IN connector.EXT: Synchronise with the referencesignal input to the GENLOCK INconnector.– C U F EGL PHASE HD SDICOMPOSITFor selecting the output signals that lockphases to the signals that are input inthe GENLOCK IN connector. (Only for1080-59.94i, 1080-50i, 720-59.94P, or720-50PHD SDI:For locking the HD SDI signals to theGENLOCK input.For the down converter outputsignals, the start position of the videodelays by about 90 lines.COMPOSIT:For locking the down converter outputsignals to the GENLOCK input.For the HD SDI output signals, thestart position of the video gains byabout 90 lines.– C U F RH PHASECOARSE–50:+00:+50Perform coarse phase adjustment forhorizontal hold when configuring asystem.– – – – –H PHASEFINE–160:+000:+160Perform fine phase adjustment forhorizontal hold when configuring asystem.NoteThis adjustment simultaneously shiftsthe SC phase.– – – – –1394 SETTINGItems/Data SavedAdjustableRange Remarks1394 AUDIOOUTCH1/CH2CH3/CH4For selecting the channels for audiosignals output from the DVCPRO/DVconnector when the camera-recorder isoperating in DVCPRO or DV mode (for480-59.94i or 576-50i only)NoteWhen CH3/CH4 is selected, no sound isheard in the following outputs:z EE output if the 25M REC CH SELmenu option on the MIC AUDIOscreen on the MAIN OPERATIONpage is set to 2CH.z Output of playback data recorded as2-channel audio signals.– C U F –1394 SPEED S100S200S400For setting the transfer rate of signalsoutput from the DVCPRO/DV connector.S100:100MbpsS200:200MbpsS400:400Mbps– C U F –1394 IN CH 0:63AUTOFor setting the input channel of signalsinput to the DVCPRO/DV connector.0 - 63: To fix to the designated valueAUTO: To follow the settings of theexternally connected devices– C U F –1394 OUT CH 0:63AUTOFor setting the input channel of signalsoutput from the DVCPRO/DV connector.0 - 63: To fix to the designated valueAUTO: To follow the settings of theexternally connected devices– C U F –1394CONTROLOFFBOTHFor setting the control for recordingstart/stop operations of external devicesthat are connected to the DVCPRO/DVconnector.OFF: Do not control the externallyconnected devices.BOTH:To control both the unit and theexternally connected devices– C U F –1394 CMD SEL REC_PSTOPFor setting the control of recording stopoperations of the external devices thatare connected to the DVCPRO/DVconnector.REC_P: Operation to pause recordingSTOP: Stopping operation– C U F –
