55Adjustments and Settings for Recording : Setting Time DataAdjustments and Settings for RecordingIn the unit, there is a video signal delay in the camera,which is required or the process of converting videoimages taken with the image-shooting element from theprogressive signals to the interlace signals. Since time isrequired for making the 2:3 pull-down from the 24P frame,there is a video signal delay in the camera. Whenrecording from a device that can record images without adelay and the unit is connected in parallel, it is necessaryto synchronize the time code. To set this timing, open the screen from the VTR MENU page and set it inthe TC VIDEO SYNCRO item.Set by referring to the connection example.Setting of the TC VIDEO SYNCRO itemExample 3:When the unit and an external device are locked to theexternal time code generator, which is connectedexternally, and when simultaneous recording is madeby using the TC OUT output signals.Example 4:When the unit and an external device are locked to theexternal time code generator and when several unitsof the camera are connected in a cascadeconfiguration.Item Variablerange RemarksTC VIDEOSYNCRO0123For setting to correct the time codeaccording to the delay of videosignals.0: Do not correct.1: To delay the time code to be inputaccording to the timing of thevideo images.2: To forward the time code to beoutput according to the timing ofthe video images.3: To delay the time code to be inputand forward the time code to beoutput, respectively, according tothe timing of the video images.TCGTC OUTTC OUTTC INREF INTC INTC INGENLOCK INVIDEO INSDI INHD SDI INAJ-HPX2100DATReference video signalExternal time code generatorDevice that records images without adelaySettings of the TCVIDEO SYNCROitem: 1MON OUTorVIDEO OUT VTR etc.TCGTC OUTTC OUTTC INTC INGENLOCK INAJ-HPX2100TC INAJ-HPX2100GENLOCK INGENLOCK INDATTC OUTTC INAJ-HPX2100TC OUTReference video signalExternal time code generatorDevice that records images without a delaySettings of the TCVIDEO SYNCROitem: 12nd unit and laterSettings of the TCVIDEO SYNCROitem: 01st unitSettings of the TCVIDEO SYNCROitem: 0
