84 Adjustments and Settings for Recording : Handling data1 Using the menu operations, open the screen from the FILE page.2 Turn the JOG dial button to move the arrow (cursor) tothe FILE SELECT item.3 Press the JOG dial button and the file number willflash. Turn the JOG dial button to select the file (1 to8) to be recorded.4 Press the JOG dial button to enter the file number.5 Turn the JOG dial button to move the arrow (cursor) tothe “TITLE : ” item.6 When the JOG dial button is pressed, the arrow(cursor) moves to the title input area, and the inputmode is established.7 Press the JOG dial button again and turn it until thecharacter to be set is displayed.When the button is turned, the character displayed isswitched in the following sequence:Space: ÐAlphabetical characters: A to ZÐNumerals: 0 to 9ÐSymbols: ', >, <, /, -, . , x8 Press the JOG dial button to enter the character.9 Turn the JOG dial button to move the arrow (cursor) tothe next position (right), and repeat steps 7 and 8 toset the characters (maximum of 12).10 When the title has been input, turn the JOG dialbutton to move the arrow (cursor) to the “:” position.11 When the JOG dial button is pressed, the arrow(cursor) returns to the “TITLE : ” item.12 Turn the JOG dial button to move the arrow (cursor) tothe WRITE position.To save the lens file into the built-in memorySelect the file No.< LENS FILE ># FILE NO. :1READWRITERESET ALLTITLE:1: 5:2: 6:3: 7:4: 8:Give a title to the selected file.< LENS FILE >FILE NO. :1READWRITERESET ALL# TITLE:1: 5:2: 6:3: 7:4: 8:< LENS FILE >FILE NO. :1READWRITERESET ALL;TITLE:1: 5:2: 6:3: 7:4: 8:< LENS FILE >FILE NO. :1READWRITERESET ALL;TITLE:¢¢¢¢¢¢¢¢¢¢¢¢1: 5:2: 6:3: 7:4: 8:< LENS FILE >FILE NO. :1READWRITERESET ALL# TITLE:¢¢¢¢¢¢¢¢¢¢¢¢1: 5:2: 6:3: 7:4: 8:< LENS FILE >FILE NO. :1READ# WRITERESET ALLTITLE:¢¢¢¢¢¢¢¢¢¢¢¢1: 5:2: 6:3: 7:4: 8:
