85Adjustments and Settings for Recording : Handling dataAdjustments and Settings for Recording13 When the JOG dial button is pressed, the followingmessage appears.14 Turn the JOG dial button to move the arrow (cursor) toYES, and press the JOG dial button.The current white shading correction value, the flarecompensation value, and the RB gain offsetcorrection value are stored in the built-in memory ofthe unit.NoteThe values will not be stored in the unit’s internalmemory if another menu screen is selected withoutexecuting WRITE or if the menu is exited.15 Press the MENU button.The setting menu is cleared, and the displaysshowing the unit’s current statuses appear at the topand bottom of the viewfinder screen.1 Using menu operations, open the screen from the FILE page.2 Turn the JOG dial button to move the arrow (cursor) tothe FILE SELECT item.3 Press the JOG dial button and the file number willflash. Turn the JOG dial button to select the file (1 to8) to be read.4 Press the JOG dial button to enter the file number.5 Turn the JOG dial button to move the arrow (cursor) tothe READ item.6 When the JOG dial button is pressed, the followingmessage appears.7 Turn the JOG dial button to move the arrow (cursor) toYES, and press the JOG dial button.The recorded correction values for the white shading,flare, and RB gain offset are read.8 Press the MENU button.The setting menu is cleared, and the displaysshowing the unit’s current statuses appear at the topand bottom of the viewfinder screen.WRITE?YES# NOTo read the lens file from the builtin memory< LENS FILE ># FILE NO. :1READWRITERESET ALLTITLE:1: 5:2: 6:3: 7:4: 8:< LENS FILE >FILE NO. :1# READWRITERESET ALLTITLE:1: 5:2: 6:3: 7:4: 8:READ?YES# NO
