115Manipulating Clips with Thumbnails : PropertiesManipulating Clips with ThumbnailsThe clip’s properties and the P2 card’s status are displayed.From the thumbnail menu, select PROPERTY > CLIPPROPERTY. The following screen appears.1. Clip Number2. Thumbnail3. Clip InformationIndicates the indicators added to the clip and thenumber of text and voice memos added to the clip.The mark appears if the clip is recorded on a write-protected P2 card.NoteAJ-HPX2100 is not capable of recording or playingback voice memos.4. Clip InformationDisplays detailed information about the clip.CLIP NAME:Display clip names.START TC:The time code value at the start of therecording.START UB:The user bit value at the start of therecording.DATE: The date of the recording.TIME: The time at the start of the recording.DURATION:The time length of the clip.V-FORMAT:The recording format for the clip.FRAME RATE:The frame rate for the playback.REC RATE:The recording frame rate is displayed. (Thisis indicated on the clip that data is recordedin a special way using the camera recorder.)5. Clip Meta DataDisplays more detailed data about the clip. Use thecursor buttons to move the pointer, and press the SETbutton to check the detailed content. The underlineditems are automatically set during shooting. For moreinformation on displayed metadata, see [Setting of ClipMeta Data] (page 109).Select PROPERTY > CARD STATUS from the thumbnailmenu to set the desired indication mode (remaining freespace or used memory capacity) for the P2 card statusdisplay.1 Press the THUMBNAIL button.The thumbnail screen appears on the LCD monitor.2 Press the MENU button and select PROPERTYPROPERTY SETUP P2 CARD CAP from thethumbnail menu.The following screen appears. Select the P2 cardstatus display settings from the P2 CARD CAP menuoption.REMAIN:Show remaining free space on the P2 card as the P2card status display. (Factory setting)USED:Show used memory capacity on the P2 card as theP2 card status display.PropertiesClip Property1234P2 Card Status DisplayP2 Card Status Display Settings
