Panasonic AJ-PX5000G Operating Instructions Manual

Also see for AJ-PX5000G: Review Operating instructions Operating instructions

Contents

Panasonic AJ-PX5000G Operating Instructions Manual Manual pdf 11 page image

– 11 –Chapter 1 Overview — Setting the region of use (setting frame frequency, etc.)Setting the region of use (setting frame frequency, etc.)When the camera is shipped, the region of use is not set. Before you use the camera, follow the steps below to change the setting to the framefrequency of the region of use.1 After connecting the power supply to the camera and turning the camera on, press the button while holding down the button.[OPTION MENU] is displayed.2 Use the jog dial button (or cursor buttons) to select [AREA SELECT], and select the region to be used from among [NTSC]/[NTSC(J)]/[PAL].3 Press the jog dial button (or button).The camera restarts automatically, and the initial data for each region is reflected in the initialization values and the setting values currently in use.4 Select [YES] in the confirmation message, and press the jog dial button (or button).@@ NOTEt To apply settings, select [NTSC]/[NTSC (J)]/[PAL] by [AREA SELECT], and then be sure to press the button.t When [AREA SELECT] is changed, [AREA SET] flashes.t When making this setting to use the camera for the first time, only the following items are changed on the camera. Menu setting values other thefollowing items stay at their factory settings.Factory settings [NTSC] [NTSC (J)] [PAL][LINE&FREQ] [1080-59.94i] [1080-59.94i] [1080-59.94i] [1080-50i][SETUP(7.5%)] [ON] [ON] [OFF] [OFF][REAR LINE IN LVL] [4dB] [4dB] [4dB] [0dB][AUDIO OUT LVL] [4dB] [4dB] [4dB] [0dB][HEADROOM] [20dB] [20dB] [20dB] [18dB]GUI metadata languagedisplay US English US English Japanese/for Japan US English[LANGUAGE]* No display No display [ENGLISH][JAPANESE] No display* For details, refer to “Setting metadata display language” (page 118).