– 167 –Chapter 7 Menu Operations — Menu list[BLACK SHADING]Item Description of settings Remark[CORRECT] Enables/disables digital black shading correction.[ON], [OFF][DETECTION(DIG)] Executes digital black shading correction.are factory settings.[WHITE SHADING]Item Description of settings Remark[CORRECT] Enables/disables white shading correction.[ON], [OFF][R H SAW] White shading correction is performed manually.Adjusts sawtooth waveforms and parabolic wave forms of RGB channels in thehorizontal and vertical directions.[−255]…[0]…[255][R H PARA][R V SAW][R V PARA][G H SAW][G H PARA][G V SAW][G V PARA][B H SAW][B H PARA][B V SAW][B V PARA]are factory settings.[LENS FILE ADJ]Item Description of settings Remark[LENS FILE ADJMODE]Selects the mode to perform lens adjustment. f Data adjusted in [LENS FILE ADJ] can be savedas a lens file to the SD memory card.[ON] Uses the adjustment value of this [LENS FILE ADJ].The Rch and Bch gain adjusted in the main menu → [PAINT] →[RB GAIN CONTROL], and the Rch, Gch, and Bch flare levelsadjusted in [RGB BLACK CONTROL] are disabled.[OFF] The Rch and Bch gain adjusted in the main menu → [PAINT] →[RB GAIN CONTROL], and the Rch, Gch, and Bch flare levelsadjusted in [RGB BLACK CONTROL] are enabled.[LENS R GAINOFFSET]Corrects the Rch sensitivity of the lens to use.[−200]…[0]…[200][LENS B GAINOFFSET]Corrects the Bch sensitivity of the lens to use.[−200]…[0]…[200][LENS R FLARE] Adjusts the Rch flare level.[0]…[100][LENS G FLARE] Adjusts the Gch flare level.[0]…[100][LENS B FLARE] Adjusts the Bch flare level.[0]…[100]are factory settings.[CAC ADJ]Item Description of settings Remark[CAC CONTROL] Turns chromatic aberration correction (CAC) [ON]/[OFF].[ON] Compensates for chromatic aberration.[OFF] Does not compensate for chromatic aberration.[LIST/DELETE] Views the list of CAC FILE stored in the camera internal memory and deletes filesof the numbers selected from the list of CAC FILE.[No1]…[No32]are factory settings.
