– 166 –Chapter 7 Menu Operations — Menu listItem Description of settings Remark[SAVE] Specifies a title and file number for the current setting values and saves them as ascene file in the camera memory.[CLEAR] Selects and initializes a scene file saved in the camera memory. The title isremoved and saved data is returned to factory settings.are factory settings.[SD CARD PROPERTY]Displays the SD memory card status.The format condition, available space, etc. can be confirmed.Item Description of settings Remark[SD STANDARD] Indicates whether an SD memory card is formatted according to the SD/SDHC/SDXC standard.[SUPPORTED]: Complies with SD/SDHC/SDXC standards[NOT SUPPORTED]: Does not comply with SD/SDHC/SDXC standards[USED] Displays used capacity (bytes).[BLANK] Displays available space (bytes).[TOTAL] Displays total capacity (bytes).[PROXY REM] Displays remaining recording capacity of SD card when recording proxy.[NUMBER OF CLIPS] Copy and proxy records display the clip quantity inside an SD memory card.[PROTECT] Write prohibited.are factory settings.[FORMAT SD CARD]Formats an SD memory card.[LOAD USER DATA]Loads a user file saved in the camera memory.[INITIALIZE]Item Description of settings Remark[LOAD FACTORYDATA]All menu values are set to factory settings. f The following data is not returned to factorysettings.- Scene files- User data- Lens files- Black shading data[SAVE USER DATA] User menu setting values are saved as user data in the camera memory.Can be used as saved data the user can uniquely set.Load user data in the main menu → [FILE] → [LOAD USER DATA].are factory settings.[MAINTENANCE][SYSTEM CHECK]Item Description of settings Remark[COLOR CHECK] Displays the RGB level near screen center in the viewfinder, and displays whetherall systems (from the optical to digital) are transmitting normally.are factory settings.[LENS ADJ]Item Description of settings Remark[F2.8 ADJ] Sets the iris to F2.8 only when set to [ON]. (Adjusts so that it becomes F2.8 at thelens)[ON], [OFF][F16 ADJ] Sets the iris to F16 only when set to [ON]. (Adjusts so that it becomes F16 at thelens)Can be used as saved data the user can uniquely set.[ON], [OFF]are factory settings.
