|
– 149 –Chapter 7 Menu Operations — Menu listItem Description of settings Remark[USER1] (Select afunction)Assigns the button.For selectable functions and an explanation of functions, referto “Assigning functions to buttons” (page 56).[S.GAIN] is assigned in the factory setting.(Detectiontime)Selects a response to accept when the button ispressed.[NORMAL] Accepts immediately when pressed.[1sec] Accepts when pressed and held down forapprox. one second.[USER2] (Select afunction)Assigns the button.For selectable functions and an explanation of functions, referto “Assigning functions to buttons” (page 56).[DS.GAIN] is assigned in the factory setting.(Detectiontime)Selects a response to accept when the button ispressed.[NORMAL] Accepts immediately when pressed.[1sec] Accepts when pressed and held down forapprox. one second.[SHOT MARK (U3)] (Select afunction)Assigns the button.For selectable functions and an explanation of functions, referto “Assigning functions to buttons” (page 56).[SHOT MARK] is assigned in the factory setting.(Detectiontime)Selects a response to accept when the button is pressed.[NORMAL] Accepts immediately when pressed.[1sec] Accepts when pressed and held down forapprox. one second.[TEXT MEMO (U4)] (Select afunction)Assigns the button.For selectable functions and an explanation of functions, referto “Assigning functions to buttons” (page 56).[TEXT MEMO] is assigned in the factory setting.(Detectiontime)Selects a response to accept when the buttonis pressed.[NORMAL] Accepts immediately when pressed.[1sec] Accepts when pressed and held down forapprox. one second.are factory settings.[SW MODE]Item Description of settings Remark[RET SW] Sets the function when the button on the lens is pressed. f The return video is not displayed correctly whenan image signal that differs from the video systemof this camera.f When the main menu → [I/F SETUP] →[GENLOCK] → [GENLOCK] is set to [INT], returnvideo images may sometimes be skewed slightlyin the horizontal direction.f When switching between camera images andreturn video images, the image on the viewfinderand LCD monitor may be disrupted for an instant.This is not a malfunction.[INHIBIT] The button function is disabled.[REC CHECK] Recording check function is enabled. Records can be checkedof the last several seconds recorded.[CAM RET] Return video function is enabled. While the button ispressed, the signal supplied to the terminal can bechecked on the viewfinder and LCD monitor.[ASSIST] Turns the focus assist display [ON]/[OFF].[D.ZOOM] Digital zoom function is enabled. Digital zoom can be switched[ON]/[OFF].[EVF CLR] Selects whether to display video in the viewfinder in color or inblack and white.[TEXT MEMO] Text memo function is enabled. A text memo can be recorded tothe frame selected when the button is pressed.[SHOT MARK] Shot mark function is enabled. Press to add a shot mark, andpress again to remove it.[S.BLK LVL] Sets the super black level.[−30], [−20], [−10], [OFF][AUTO KNEE SW] Enables/disables auto knee function and DRS function.[DRS] When the switch is in the position, DRSfunction is enabled.[ON] When the switch is in the position, autoknee function is enabled.[OFF] Even if the switch is in the position, bothauto knee function and DRS function are not enabled.[SHD,ABB SW CTL] Sets whether to automatically adjust black shading when the switch is pressed and held down on the side for two seconds or more.[ON], [OFF]are factory settings.
|
