– 169 –Chapter 7 Menu Operations — Menu list[HOURS METER]Item Description of settings Remark[OPERATION] Displays the total time the camera power was turned on.[P.ON TIMES] Displays the total number of times the camera power was turned on.are factory settings.[VERSION]Item Description of settings Remark[VERSION] Displays the versions of the camera. Move the cursor right and left to changepages.f Turn the jog dial button (or press the cursorbuttons Y/I) to display the list screen for eachfirmware version.[VERSION] Displays the version (representative version) of all firmware inthe camera.[MODELNAME]Displays the product name of the camera.[SERIAL NO.] Displays the serial number of the camera.[MACADDRESS]Displays MAC address of the camera (Media Access Controladdress).[UID] Displays the unique ID of the camera.[UPDATE]Performs an update of the camera firmware. (Enabled only when there is a dedicated update file on the SD memory card.)[USER MENU SEL]This is a menu to select items to be displayed in [USER MENU]. For details, refer to “Setting [USER MENU]” (page 135) and “Setting items to [USERMENU] and loading/reading the settings to a data file” (page 170).[OPTION MENU][OPTION]Item Description of settings Remark[ENG SECURITY] Selects whether to place restrictions on opening and closing the menu screen.[ON] Disables opening menu items other than [USER MENU]. Torelease, consult your dealer.[OFF] Opening and closing are not restricted.[FAN MODE] Sets the fan operation mode. f Once the power is turned off, this item is alwaysset to [AUTO] the next time power is turned on. Ifoperation continues while the fan is stopped, theinternal temperature of the camera rises and itmay not be able to record or playback normally.Normally, use the camera in [AUTO][AUTO] If the camera internal temperature rises, the fan willautomatically rotate.[OFF] The fan does not rotate at all times. The warning [FANSTOPPED] is displayed.are factory settings.[AREA SETTING]Item Description of settings Remark[AREA SELECT] Select the region in which to use the camera before the initial use. f For details, refer to “Setting the region of use(setting frame frequency, etc.)” (page 11).[NTSC] Selects an NTSC region other than Japan.[NTSC (J)] Selects Japan.[PAL] Selects the PAL region.are factory settings.
