– 88 –Chapter 4 Adjustments and Settings for Recording — Handling setting dataReading setup data written to SD memory cardSelect the type of menu to read beforehand in the main menu → [FILE] → [SETUP DATA SELECT].1 Select [LOAD] in the main menu → [FILE] → [SETUP DATA (SD CARD)], and press the jog dial button (or button).A list of setup files stored in the specified folder in the SD memory card is displayed.2 Select the file name to read, and press the jog dial button (or button).The confirmation screen is displayed.If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading is complete.3 Select [YES], and press the jog dial button (or button).Loading of the file begins.For details on error messages if an error message is displayed, refer to “Warning/error displays in the thumbnail operation, menu operation, andUSB storage mode” (page 197).How to use user dataThe content of setting data can be written to and read written data from user area on the camera’s internal memory.Use of this data allows you to quickly reproduce optimum setup states.Writing setting data to user area1 Select [SAVE USER DATA] in the main menu → [FILE] → [INITIALIZE], and press the jog dial button (or button).The confirmation screen is displayed.2 Select [YES], and press the jog dial button (or button).3 When the completion message is displayed, press the jog dial button (or button).Reading written user data1 Select [LOAD USER DATA] in the main menu → [FILE], and press the jog dial button (or button).The confirmation screen is displayed.If [SYSTEM RESTART] is displayed on the confirmation screen, the camera will restart after reading out is complete.2 Select [YES], and press the jog dial button (or button).Reading out of the file begins.How to use scene file dataThe content of setting data can be written to and read written data from scene file area on the camera’s internal memory. Four types of scene files canbe registered. Use of this data allows you to quickly reproduce optimum setup states.Writing setting data for scene files1 Select [SAVE] in the main menu → [FILE] → [SCENE], and press the jog dial button (or button).The list of scene files currently saved in camera memory is displayed.
