10188-2-4 REC FUNCTIONDisplayed REC TIME, PAUSE TIME and TOTAL REC TIME aretranslated into either drop-frame or non-drop-frame according tothe mode of operation.TAKE TOTAL TIME is actual time. Therefore, TOTAL REC TIMEmay incorporate fractions, depending on the settings.The ____ in the Adjustable Range column indicates the presetmode.Items/Data SavedAdjustableRange RemarksINTERVAL RECMODEONONE SHOTOFFSets INTERVAL REC function.ON: Uses internal memory to performinterval recording.ONE SHOT:Performs “one-shot” recording for theduration specified under REC TIME, andthen stops.OFF: INTERVAL REC is not performed.After the power is turned off, this settingdefaults to OFF when the power is nextturned on.– – – F –REC TIME 00s01f:59s29fSet REC TIME (1 cut).During 24P or 24PA modes, operations areperformed in 5-frame units, and the fractionis truncated. The minimum operation is 5frames (if the setting is 9 frames or fewer).– C U F –PAUSE TIME 00h00m00s01f:00h04m59s29f:23h59m59s29fSpecify PAUSE time for recording.During 24P or 24PA modes, operations areperformed in 5-frame units, and the fractionis truncated. The minimum operation is 5frames.– C U F –TAKE TOTALTIMENONE:5daySpecify the time needed for shooting.Select from NONE (continue until operationis manually stopped) to 5 days.– C U F –TOTAL RECTIME00m00s01f:99m59s29fOVER100minNONEDisplay total recorded time. The settingcannot be changed using this option.Displays the recording time (recording timeneeded for the P2 card) calculated usingREC TIME, PAUSE TIME, and TAKE TOTALTIME.During 24P mode or 24PA mode, operationsare performed in 5-frame units, and thefraction is truncated. The displayed value isbased on actual operation using 5 frames asa unit.– – – – –AUDIO REC ONOFFSelect whether or not sound will berecorded.– C U F –START DELAY 0SEC:10SECSet the delay after pressing REC START tostart recording in INTERVAL REC.– C U F –PRE REC TIME 0SEC:15SECSet PRE RECORDING.0-15SEC:Set the length of time that can beretrospectively recorded before the RECSTART button is pressed.The maximum selectable range is 8 secondswhen the REC MODE in the MODE> screen is set to 50M (DVCPRO50).– C U F –LOOP RECMODEONOFFSelect whether or not to enable LOOP REC.This setting can be used with PRERECORDING features.ON: Enable LOOP REC.OFF: Disable LOOP REC.After the power is turned off, this item willdefault to OFF the next time the power isturned on.– – – F –Items/Data SavedAdjustableRange RemarksVOICE MEMORESERVONOFFSet the available memory space for voicememos in P2 cards.ON: Reserve a voice memo area of 10minutes or longer separately from thevideo recording capacity. The voicememo area can be used even whenFULL is displayed for the recordingcapacity of the P2 card.OFF: Do not reserve any voice memospace.Even when this item is set to OFF, and FULLis displayed for the P2 card’s recordingcapacity, it may be possible to record voicememos depending on the status of the P2card.– C U F –REC START ALLNORMALSelect operating modes that allow recordingto start.ALL: Allow recording to start during stop,recording pause, and playback.NORMAL:Allow recording to start during stop andrecording pause.When the INTERVAL REC MODE is set toeither “ON” or “ONE SHOT”, the “ALL”setting for this option switches to “NORMAL”operation.– C U F –P.ON RECSLOT SELHOLDSLOT1Select the recording order of the slot whenthe power is turned on.HOLD:The recording order starts with the cardpreviously selected when the power wasturned off.SLOT1:The recording order starts with the cardthat is inserted in Slot 1 when the poweris turned on.– C U F –Example of drop-frameREC TIME 02s00fPAUSE TIME 02s00fTAKE TOTAL TIME 40minTOTAL REC TIME 19m59s06fᤨࠫ
