10388-2-7 GENLOCK8-3 PAINT8-3-1 ROPThe ____ in the Adjustable Range column indicates the presetmode.Items/Data SavedAdjustableRange RemarksGENLOCK INTEXT26P EXTSwitch the camera synchronising signal.INT: Synchronise with the internalreference signal regardless of thereference signal input to theGENLOCK IN terminal.EXT: Synchronise with the reference signalinput to the GENLOCK IN terminal.26P EXT:Synchronizes to the signal input via the26-pin connector.– C U F EH PHASECOARSE–50:+00:+50Perform coarse phase adjustment forhorizontal hold when configuring a system.– – – – –H PHASE FINE –160:+000:+160Perform fine phase adjustment for horizontalhold when configuring a system.This adjustment simultaneously shifts theSC phase.– – – – –SC PHASECOARSE01:3Perform coarse SC PHASE adjustmentwhen GENLOCK is set.– – – – –SC PHASEFINE–75:+00:+75Perform fine SC PHASE adjustment whenGENLOCK is set.When adjusting GENLOCK, please adjust HPHASE first, and then adjust SC PHASE.– – – – –Items/Data SavedAdjustableRange RemarksMASTER PED –200:+000:+200Set the master pedestal level.S C U F EMASTER DTL –31:+00:+31Set the H Detail and V Detail levels.S C U F EMASTERGAMMA0.35:0.45:0.75Set MASTER GAMMA in 0.01 steps.S C U F EKNEE POINT 70.0%:85 0%:107.0%Set the KNEE POINT position in 0.5% steps.S C U F EKNEE SLOPE 0:50:99Set the KNEE slope.S C U F ER GAIN –200:+000:+200Set the Rch gain.S C U F EG GAIN –200:+000:+200Set the Gch gain.S C U F EB GAIN –200:+000:+200Set the Bch gain.S C U F ER PEDESTAL –100:+000:+100Set the Rch pedestal level.S C U F EG PEDESTAL –100:+000:+100Set the Gch pedestal level.S C U F EB PEDESTAL –100:+000:+100Set the Bch pedestal level.S C U F Eᤨࠫ
