72This completes the white shading adjustment.The compensation values are stored in the non-volatile internalmemory. Therefore, re-adjusting the white shading is notrequired, even after the camera-recorder power has been turnedoff.Storing the Lens File DataThe white shading compensation values can be stored in theinternal memory as lens file data.1 Activate the MENU and go to the FILE page to open the screen. Turn the JOG Dial to move the cursor tothe item FILE NO.2 Press the JOG Dial button and FILE NO. will start blinking.Turn the JOG Dial button to select the desired lens file (1-8)to be stored.3 Press the JOG Dial button to confirm the lens file.4 Turn the JOG Dial button to move the cursor to [TITLE:].5 Press the JOG Dial button. The cursor moves to the titleinput field, and input mode is enabled.6 Press the JOG Dial button again and turn it until a desiredletter for the title appears.Turning the JOG Dial button changes the letter displayed inthe following sequence:Space: ÐAlphabetical characters: A to ZÐNumerals: 0 to 9ÐSymbols: ', >, <, /, -7 Press the JOG Dial button to confirm the letter.8 Turn the JOG Dial button to move the cursor to the nextposition (to the right), and repeat Steps 6 to 7 to set theletters for the title. (Up to 12 letters)9 When the title input is completed, turn the JOG Dial buttonto move the cursor to the [:] position.10 Press the JOG Dial button. The cursor returns to [TITLE:].11 Turn the JOG Dial button to move the cursor to [WRITE:].12 Press the JOG Dial button and the following messageappears.13 Turn the JOG Dial button to move the cursor to [YES].Then, press the JOG Dial button.[WRITE OK] will appear after writing is completed,indicating that the set data and the title have been stored inthe lens file area of the camera’s internal memory.14 Press the MENU button to exit the menu operation.Selecting the File number /(16),/(! ),/(12 5($':5,7(7,7/( Adding a Title to the Selected File No. /(16),/(!),/(12 5($':5,7( 7,7/( /(16),/(!),/(12 5($':5,7(7,7/( :5,7("<(6 127,7/( ᤨࠫ
