Panasonic AJ-SPX800P Operating Instructions Manual

Also see for AJSPX800P - P2 CAMCORDER: Mechanical Parts List Operating instructions Operating instructions

Contents

50Gain value __dB Current gain value.System informationand warningsSYSTEM ERROR-__TURN POWER OFFREC WARNINGBACKUP BATT EMPTYWIRELESS-RFEOMBOSEOSCANNOT RECCANNOT PLAYCOMM ERRORVOICE CANNOT RECVOICE RECVOICE OFFVOICE PLAYMARK ON/OFFUPDATINGUSB DRIVETHUMBNAIL OPEN1394 INITIAL ERRORPROXY REC P2&SDPROXY REC P2EOM (SD)PROXY CARD ERRORSD CARD WRITE ERRSomething abnormal is happening to the internal computer communications orreference signal. No further recording or playback can be performed. __isreplaced with an error code.For more information, see [7-3-2 Error Codes].P2 card has been removed while being accessed (recorded, played back, orformatted), and subsequent operation is disabled.Something abnormal is happening to video and/or audio being recorded.Backup battery needs replacing.RF signal from the wireless receiver is degraded.P2 card has no free space.Playback position is at the start of all the clips.Playback position is at the end of all the clips.The P2 card is not recordable. Detailed information is provided on the FUNCTIONscreen of MODE CHECK. See the relevant section of the MODE CHECKindication area.Clip cannot be played back perhaps because no P2 card is loaded, or the P2 cardcontains no clips.Displayed when disconnection between microcomputers continues for a specifiedperiod or longer.Voice memos cannot be recorded, possibly perhaps because the P2 card has nofree space, or 100 voice memos are already recorded on one clip.Voice memo being recorded.Recording of voice memo stopped.Voice memo being played back.Shot mark been added or deleted. For information on shot marks, see [3-10 ShotMark Function].Clip information is being updated. Playback operation disabled.AJ-SPX800P is in USB mode. When communication is disabled, the indicationblinks.Thumbnail is being manipulated.Displayed when the connection of the DVCPRO/DV connector is abnormal (whenAJ-YAD800G is attached).Displayed when proxy recording on either the P2 card or the SD memory cardstarts (when AJ-YAX800G is attached).Displayed when proxy recording on the P2 card starts (when AJ-YAX800G isattached.).Displayed when full capacity is reached during proxy recording on the SD memorycard (when AJ-YAX800G is attached).Displayed when proxy recording stops because of failure on either the videoencoder card or the stream.(when AJ-YAX800G is attached).Displayed when a failure occurs on the SD memory card during proxy recording,and only recording on the SD memory card stops.(when AJ-YAX800G is attached).Voice memoindicationVoice memo being recorded. When the free space for voice memos is less thanone minute, the indication blinks.Audio input channeland level meter- - - - - - - - +FWRSelected channel together with its audio level.AUDIO IN switch is positioned at FRONT.AUDIO IN switch is positioned at WIRELESS.AUDIO IN switch is positioned at REAR.Time code indication TCG 12:59:59:20TCR 12:59:59:20(V)UBG AB CD EF 00(V)UBR 12 34 56 78CTL –1:59:59:20TCG (time code generator value)TCR (time code reader value)UBG VUBGUBR VUBR.Displays CTL count.DV format indication DV DV format specified and playback being performed in the DV format.Iris overrideindication+ ++(No indication)–– –Correction phase of the iris override (when active)+ + : On the open side by 1 +: On the open side by 0.5– – : On the closed side by 1 –: On the closed side by 0.5No indication : Standard statusIris, F value NCOPENF1.7 - F16CLOSELens cable is not connected.Lens iris is at maximum.Lens iris valueLens iris closed.These indications are provided when the lens is capable of indicating the iris value.When the iris is being overridden, they blink.Zoom indication Z00 - Z99 Zoom degree is indicated. This indication is not provided for a lens that does notreturn the zoom position, even if the indication is set to ON.INTERVAL REC/PRERECORDINGindicationiiREC (blink)iREC (blink) __h__m/__sP-REC (blink)Displayed before and after operation during INTERVAL REC mode.Displayed during INTERVAL REC operation.Displays the pause time before the next recording during INTERVAL REC.Indicated while pre-recorded video and audio are being recorded on the P2 card.ID record indication ID The ID is set to be superimposed on the video from the camera.Information Item Indication StatusVᤨࠫ