10988-3-12 CAMERA SETTINGZEBRA Pattern DisplayAll items in CAMERA SETTING are setting targets of the itemPAINT MENU SW() R/W in the screen.8-4 VF8-4-1 VF DISPLAYThe ____ in the Adjustable Range column indicates the presetmode.Items/Data SavedAdjustableRange RemarksDETAIL ONOFFSet the DTL (H, V) to ON or OFF.S C U F E2D LPF ONOFFON/OFF switching for the two-dimensionalLPF that reduces cross-color.S C U F EHIGH COLOR ONOFFON/OFF switching for the HIGH COLORmode, which enhances the color dynamicrange.S C U F EGAMMA ONOFFSet the gamma circuit to ON or OFF.S C U F ETEST SAW ONOFFSwitch the test signal ON or OFF.S C U F EFLARE ONOFFSet the flare correction to ON or OFF.S C U F EH-F COMPE. ONOFFON/OFF switching for the H-F COMPEmode, which enhances the DTL in the high-frequency range.S C U F ESPOTOFFON109%0%ZEBRA 2DETECTZEBRA 2ZEBRA 1DETECTVideo LevelItems/Data SavedAdjustableRange RemarksDISPCONDITIONNORMALHOLDNORMAL : Display status constantly.HOLD: Display status only when theMODE CHECK switch is pressed.– C U F EDISP MODE 123Set the DISP MODE.Switch the camera’s Warning/Messageindication. Please refer to [4-7-4 DisplayModes and Setting Changes/adjustmentResult Messages] for more information.– C U F EVF OUT YNAMRGBSelect the VF output.Y: Brightness signalNAM: Output signal with the highest levelamong R, G, and B signals.R: Rch signalG: Gch signalB: Bch signal– C U F EVF DTL 0:3:5Select the VF DTL.Additionally enhance the DTL for the VFsignal. 0 setting is the same DTL as theprimary scan lines.– C U F EZEBRA1DETECT0%:70%:109%Set the ZEBRA1 detection level (IRE value).– C U F EZEBRA2DETECT0%:85%:109%Set the ZEBRA2 detection level (IRE value).– C U F EZEBRA2 ONSPOTOFFSet the ZEBRA2 to ON, OFF, or SPOT.– C U F ELOW LIGHT LVL OFF10%15%20%25%30%35%Set the camera incoming light volume atwhich to display LOW LIGNT.– C U F EECU MENUDISP.ONOFFSet the menu display on the VF to ON orOFF when the ECU is connected.– C U F E50MINDICATORONOFFSet the 50M recording indication to ON orOFF.– C U F EMARKER/CHARLVL50%60%70%80%90%100%Adjust the brightness of markers andcharacters displayed on the VF.– C U F Eᤨࠫ
