806-2 Thumbnail ScreenPress the THUMBNAIL button to display the thumbnail screenon the LCD monitor. Pressing the THUMBNAIL button againreturns the display to the regular display. When switching is donefrom the regular screen display to the thumbnail screen display,all the clips will be displayed on the thumbnail screen.Also, pressing the MENU BAR button in the thumbnail screenmoves the pointer to the menu bar and enables thumbnail menumanipulation.With the TCG switch positioned at [SET], when the time code oruser bits are set or when camera menus are being manipulated,thumbnails cannot be manipulated.Display ModeIndicates the thumbnail types displayed on the screen.ALL: Display all clips.SELECTED:Display randomly selected clips.MARKED: Display clips with shot marks.VOICE MEMO:Display clips with voice memo data.SLOT: Display clips in the specified P2 card.Please refer to [6-5 Switching the Thumbnail Display] formore information.Slot NumberIndicates the P2 card in which the clip under the pointer isrecorded. The slot number of the P2 card that contains theclip is displayed in yellow.If the clip is recorded across multiple P2 cards, all the slotnumbers of the P2 cards that contain the clip are displayed.The slot numbers of the other P2 cards, if inserted, aredisplayed in white.Clip NumberThe numbers set by the camera for all the clips recognisedcorrectly by the P2 card. These numbers are allocated inchronological order, by shooting dates and times.If clips cannot be played because of different recordingformats, they are displayed in red.ThumbnailThe image captured immediately after you start shooting isdisplayed as a thumbnail.Time DisplayYou can set this to display the time code at the start of cliprecording, the user bits at the start of clip recording, theshooting time, the shooting date or the shooting and date.Please refer to [6-16 Setting the Thumbnail Display Mode]for more information.The factory setting is the time code at the start of cliprecording.Menu BarThe Menu Bar includes menus for manipulating clips andswitching/setting the thumbnail display.Press the MENU BAR button on the thumbnail screen tomanipulate the menu bar. Use the cursor () and SETbuttons to select the menu.THUMBNAIL:To switch the thumbnail display and set the display mode.OPERATION:To delete clips and format a P2 card.PROPERTY:To display clip properties and P2 card status.EXIT:To return the pointer to the thumbnail.Incomplete Clip IndicatorIndicates that although a clip is recorded across multiple P2cards, one of these cards is not inserted into a P2 card slot.Voice Memo IndicatorThis marker is displayed for a clip with a voice memoattached. Please refer to [6-7 Voice Memo] for moreinformation about voice memos.Wide Clip IndicatorThis marker is displayed for clips recorded with the 16:9aspect ratio.Shot Mark IndicatorThis marker is displayed for a clip with a shot mark attached.Please refer to [6-6 Shot Mark] for more information aboutshot marks.Defective Clip IndicatorThis marker is displayed for defective clips, which may resultfrom a variety of causes, e.g., powering-down duringrecording.A clip displayed with a yellow corrupt marker can berestored. Please refer to [6-9 Restoring Clips] for moreinformation.A clip displayed with a red corrupt marker cannot berestored and must be deleted. If the clip cannot be deleted,format the P2 card.When clips have different formats, is displayed instead of.Indicator for clips with proxyThis marker is displayed for clips with proxy attached.Indicator for edit copy clipsThis marker is displayed for clips whose edit copy operationwas performed on the P2 deck. For more information on editcopy, see the AJ-SPD850 instruction manual.!7"!12"!13"Thumbnail Screenᤨࠫ
