39 (E)Basic menu operationsMenus are displayed on the monitor when the unit’s settings are to be selected.The monitor is connected to the video signal output connector (VIDEO OUT connector or HD/SD ANALOG connector).The basic menu operations involve displaying sub-menus from the main menu items, and selecting settings on the sub-menus.Some sub-menus have menu items for performing more detailed settings.The menu operations are conducted using the accessory wireless remote control.If a controller is connected, they can also be conducted using the controller. It may be necessary to upgrade the controller’s version in order to support the AW-HE100.For further details, consult with your dealer.Described below are the basic operations for changing the menu item settings using the accessory wireless remote control andcontroller (AW-RP655, AW-RP555 or AW-RP400/AW-CB400).Only the steps taken using the accessory wireless remote control will be described here for the operations conducted toselect and set the items.For details of the operations conducted using the controller, substitute “controller” for “wireless remote control” when readingthe basic operations.Also, refer to the Operating Instructions of the controller.Table of operationsMenu operation Remote controlControllerAW-RP655 AW-RP555AW-RP400/AW-CB400(The following operationsare performed using theAW-CB400.)Selecting thecamera to beoperatedPress the [CAM1],[CAM2], [CAM3] or[CAM4] button.Press one of the [1] to [5]buttons of [CONTROL/PREVIEW MONITOR OUTSEL].Press one of the [1] to [5]buttons of [CONTROL].Press one of the [1] to [5]buttons of [CONTROLSELECT].Displaying themain menuPress the [MENU]button for twoseconds.1.Press the [MENU] button.The display on theAW-RP655’s LCD panelchanges to the menu mode.2.Turn the jog dial (main), anddisplay “CAMERA SETTING”on the LCD panel.3.Press the [OK] button, anddisplay “OPEN CAMERAMENU? OK Key” on theLCD panel.4. Press the [OK] button again.Press the [MENU] button fortwo seconds.Press the [A] button of[OPTION SW] for two seconds.Selecting theitemsPress the [] or []button. Press the jog dial (main). Press the [MENU] or [ITEM]button.Press the [A] or [B] button of[OPTION SW].Displaying thesub-menusPress the [] or []button.Turn the jog dial (main)counterclockwise. Press the [YES] button. Press the [C] button of[OPTION SW].Returning to theprevious menuPress the [] or []button while “Return”is blinking.Turn the jog dial (main)counterclockwise while“Return” is blinking.Press the [YES] button while“Return” is blinking.Press the [C] button of[OPTION SW] while “Return”is blinking.Changing thesettingsPress the [] or []button. Turn the jog dial (main). Press the [YES] or [NO] button. Press the [C] or [D] button of[OPTION SW].Exiting the menuoperationsPress the [MENU]button for twoseconds.Press the [MENU] button or[R/B GAIN/PED] button.Press the [MENU] button fortwo seconds.Press the [A] button of[OPTION SW] for two seconds. Perform the menu operations and exit from the menus using the controller which displayed the main menu.If a menu operation has been performed or a menu has been exited using another controller, first display the main menuand exit from it using one controller, and then display the main menu and exit from it using the other controller.Note