1235. 6K/4K Photo and Drive SettingsSelecting pictures from 6K/4K burst file andsavingThis section describes how to select pictures from a 6K/4K burst file and save them.For information on how to record 6K/4K burst files, refer to P116.1 Select an image with the [ ] or [ ] icon on the playbackscreen, and press 3.• You can also perform the same operation by touching the icon [ ] or[ ].• If the image was recorded with [6K/4K Pre-Burst], proceed to step 3.3 Drag the frames to select the frame you want to saveas a picture.• You can also perform the same operation by pressing 2/1.• Touch and hold [ ]/[ ] to continuously rewind/forwardframe-by-frame.4 Touch [ ] or [ ] to save the picture.• A confirmation screen will be displayed.∫ Saving pictures taken with the 6K/4K Photo function at once ([6K/4K PHOTO BulkSaving])You can save pictures of a 6K/4K burst file that were extracted from any 5 second periodat once.1 Select the menu. (P55)2 Press 2/1 to select the 6K/4K photo burst files and press [MENU/SET].• If the burst time is 5 seconds or less, all frames will be saved as pictures.3 Select the first frame of the pictures to be saved at once.• Select the frame in the same way as you select pictures from a 6K/4K burst file.• Pictures will be saved as a group of Burst Mode pictures in JPEG format. (P201)2 Drag the slide bar to make a rough selection ofscenes.• For information on how to use the slide view screen, refer toP125.• If the image was recorded with [6K/4K Burst] or [6K/4KBurst(S/S)], you can select its scenes on the 6K/4K burstplayback screen by touching [ ] (Fn1). (P126)Slide view screen• The picture will be saved in JPEG format.• The picture will be saved with recording information (Exif information), including its shutterspeed, aperture and ISO sensitivity information.> [Playback] > [6K/4K PHOTO Bulk Saving]Fn2Fn1MENU
