7. Recording Motion Pictures178The camera moves focus from the current position to a pre-registered position.1 Set the mode dial to [ ].2 Select the menu. (P55)3 Press [ ].4 Press 3/4/2/1 to select the focus position and then press [MENU/SET].5 Set the focus position.• This is the same operation as Manual Focus operation. (P101)6 Press [MENU/SET].• To register focus positions to other items, repeat steps 2 through 4.• Set the items below as needed.7 Press 3/4 to select [Start] and then press [MENU/SET].• If you press [DISP.], you can return to the setting screen.8 Press the motion picture button (or shutter button) tostart recording.• If you have enabled [Focus Transition Rec], FocusTransition will start when you start recording a motionpicture.9 Touch [POS 1], [POS 2], or [POS 3] to start FocusTransition.• The same operation can be performed by pressing 2/1 toselect the position and pressing [MENU/SET].• The MF Guide will display the current focus position A and the registered focus positionB.• Press [ ] to end Focus Transition.10 Press the motion picture button (or shutter button) again to stop recording.Moving the focus position smoothly to a registered position ([FocusTransition])> [Creative Video] > [Focus Transition] > [Focus Pull Setting] >[POS 1]/[POS 2]/[POS 3][Focus Transition Speed]Sets the moving speed of focus.[SH]/[H]/[M]/[L]/[SL]• Moving speed: [SH] (fast) to [SL] (slow)[Focus Transition Rec] Starts Focus Transition when recording starts.[POS 1]/[POS 2]/[POS 3]/[OFF][Focus Transition Wait] Sets the wait time before the start of Focus Transition.[10SEC]/[5SEC]/[OFF]MENUPOS 2 POS 3POS 1POS 1
